A crash could occur when attempting to configure a certificate via a
config file, where the algorithm for the certificate key was added
dynamically via a provider.
Reviewed-by: Viktor Dukhovni <viktor@openssl.org>
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Tim Hudson <tjh@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/26663)
Free the internal copy of parameter `value` on each early
exit.
Fixes#25906
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/25926)
- Remove e_os.h include from "ssl_local.h"
- Added e_os.h into the files that need it now.
- Move e_os.h to be the very first include
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14344)
Coverity flagged a second error in this code
we're comparing block_padding and hs_padding for >= 0, which is always
true
With the change to the use of strtoul, inputs that are preceded with a -
(i.e. negative values), are caught already, so the check is redundant
just remove the check entirely
Reviewed-by: Paul Dale <ppzgs1@gmail.com>
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
(Merged from https://github.com/openssl/openssl/pull/24993)
Coverity caught a error in a recent change, in which atoi was used to
assign a value to two size_t variables, and then checked them for being
>= 0, which will always be true.
given that atoi returns an undefined value (usually zero) in the event
of a failure, theres no good way to check the return value of atoi for
validitiy.
Instead use OPENSSL_strtoul and confirm both that the translation
passed, and that the endptr value is at the NULL terminator (indicating
that the entire string was consumed)
Fixesopenssl/private#552
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24861)
Added SSL_set_block_padding_ex() and SSL_CTX_set_block_padding_ex()
to allow separate padding block size values for handshake messages
and application data messages.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24796)
Reviewed-by: Neil Horman <nhorman@openssl.org>
Release: yes
(cherry picked from commit 0ce7d1f355)
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/24034)
strstr() is used to match multiple characters in the haystack,
whereas strchr() is used to matched only single character.
CLA: trivial
Reviewed-by: Tom Cosgrove <tom.cosgrove@arm.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/23347)
Found by running the checkpatch.pl Linux script to enforce coding style.
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/21468)
The "user" SSL object which represents the QUIC connection should have an
"inner" SSL object to represent the TLS connection.
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/19748)
TLS device offload allows to perform zerocopy sendfile transmissions.
FreeBSD provides this feature by default, and Linux 5.19 introduced it
as an opt-in. Zerocopy improves the TX rate significantly, but has a
side effect: if the underlying file is changed while being transmitted,
and a TCP retransmission happens, the receiver may get a TLS record
containing both new and old data, which leads to an authentication
failure and termination of connection. This effect is the reason Linux
makes a copy on sendfile by default.
This commit adds support for TLS zerocopy sendfile on Linux disabled by
default to avoid any unlikely backward compatibility issues on Linux,
although sacrificing consistency in OpenSSL's behavior on Linux and
FreeBSD. A new option called KTLSTxZerocopySendfile is added to enable
the new zerocopy behavior on Linux. This option should be used when the
the application guarantees that the file is not modified during
transmission, or it doesn't care about breaking the connection.
The related documentation is also added in this commit. The unit test
added doesn't test the actual functionality (it would require specific
hardware and a non-local peer), but solely checks that it's possible to
set the new option flag.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Boris Pismenny <borisp@nvidia.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Todd Short <todd.short@me.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18650)
Make the SSL object polymorphic based on whether this is
a traditional SSL connection, QUIC connection, or later
to be implemented a QUIC stream.
It requires adding if after every SSL_CONNECTION_FROM_SSL() call
which itself has to be added to almost every public SSL_ API call.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Hugo Landau <hlandau@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/18612)
The option SSL_OP_NO_EXTENDED_MASTER_SECRET was added in #3910.
And it is valid for versions below (D)TLS 1.2.
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/17597)
Add -client_renegotiation flag support. The -client_renegotiation flag is
equivalent to SSL_OP_ALLOW_CLIENT_RENEGOTIATION. Add support to the app,
the config code, and the documentation.
Add SSL_OP_ALLOW_CLIENT_RENEGOTIATION to the SSL tests. We don't need to
always enable it, but there are so many tests so this is the easiest thing
to do.
Add a test where client tries to renegotiate and it fails as expected. Add
a test where server tries to renegotiate and it succeeds. The second test
is supported by a new flag, -immediate_renegotiation, which is ignored on
the client.
Reviewed-by: Matt Caswell <matt@openssl.org>
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15184)
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
Less tersely: converted SSL_get_options, SSL_set_options,
SSL_CTX_get_options and SSL_CTX_get_options to take and return uint64_t
since we were running out of 32 bits.
Fixes: 15145
Reviewed-by: Tomas Mraz <tomas@openssl.org>
Reviewed-by: Paul Dale <pauli@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15230)
This option is only useful for the client, but it was previously
marked as only being applicable for servers.
Correct the entry to properly mark it as client-only, and update the
s_server/s_client manuals accordingly.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/15127)
It has always been the case that KTLS is not compiled by default. However
if it is compiled then it was automatically used unless specifically
configured not to. This is problematic because it avoids any crypto
implementations from providers. A user who configures all crypto to use
the FIPS provider may unexpectedly find that TLS related crypto is actually
being performed outside of the FIPS boundary.
Instead we change KTLS so that it is disabled by default.
We also swap to using a single "option" (i.e. SSL_OP_ENABLE_KTLS) rather
than two separate "modes", (i.e. SSL_MODE_NO_KTLS_RX and
SSL_MODE_NO_KTLS_TX).
Fixes#13794
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14799)
Additional renames done in encoder and decoder implementation
to follow the style.
Fixes#13622
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/14155)
By recognising the nist group names directly we can avoid having to call
EC_curve_nist2nid in libssl, which is not available in a no-ec build.
Reviewed-by: Tomas Mraz <tomas@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13916)
The old function took a DH as a parameter. In the new version we pass
an EVP_PKEY instead. Similarly for the SSL_CTX version of this function.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
This option calls SSL_set_tmp_dh() which does not exist in a no-deprecated
build. We need to implement an alternative.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/13368)
Since SSLfatal() doesn't take a function code any more, we drop that
argument everywhere. Also, we convert all combinations of SSLfatal()
and ERR_add_data() to an SSLfatal_data() call.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/13316)
Many of the new types introduced by OpenSSL 3.0 have an OSSL_ prefix,
e.g., OSSL_CALLBACK, OSSL_PARAM, OSSL_ALGORITHM, OSSL_SERIALIZER.
The OPENSSL_CTX type stands out a little by using a different prefix.
For consistency reasons, this type is renamed to OSSL_LIB_CTX.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12621)
Automatically rename all instances of _with_libctx() to _ex() as per
our coding style.
Reviewed-by: Paul Dale <paul.dale@oracle.com>
(Merged from https://github.com/openssl/openssl/pull/12970)
- In order to not add many X509_XXXX_with_libctx() functions the libctx and propq may be stored in the X509 object via a call to X509_new_with_libctx().
- Loading via PEM_read_bio_X509() or d2i_X509() should pass in a created cert using X509_new_with_libctx().
- Renamed some XXXX_ex() to XXX_with_libctx() for X509 API's.
- Removed the extra parameters in check_purpose..
- X509_digest() has been modified so that it expects a const EVP_MD object() and then internally it does the fetch when it needs to (via ASN1_item_digest_with_libctx()).
- Added API's that set the libctx when they load such as X509_STORE_new_with_libctx() so that the cert chains can be verified.
Reviewed-by: Richard Levitte <levitte@openssl.org>
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/12153)
The 'MinProtocol' and 'MaxProtocol' configuration commands now silently
ignore TLS protocol version bounds when configurign DTLS-based contexts,
and conversely, silently ignore DTLS protocol version bounds when
configuring TLS-based contexts. The commands can be repeated to set
bounds of both types. The same applies with the corresponding
"min_protocol" and "max_protocol" command-line switches, in case some
application uses both TLS and DTLS.
SSL_CTX instances that are created for a fixed protocol version (e.g.
TLSv1_server_method()) also silently ignore version bounds. Previously
attempts to apply bounds to these protocol versions would result in an
error. Now only the "version-flexible" SSL_CTX instances are subject to
limits in configuration files in command-line options.
Expected to resolve#12394
Reviewed-by: Paul Dale <paul.dale@oracle.com>
GH: #12472
... and only *define* them in the source files that need them.
Use DEFINE_OR_DECLARE which is set appropriately for internal builds
and not non-deprecated builds.
Deprecate stack-of-block
Better documentation
Move some ASN1 struct typedefs to types.h
Update ParseC to handle this. Most of all, ParseC needed to be more
consistent. The handlers are "recursive", in so far that they are called
again and again until they terminate, which depends entirely on what the
"massager" returns. There's a comment at the beginning of ParseC that
explains how that works. {Richard Levtte}
Reviewed-by: Dmitry Belyavskiy <beldmit@gmail.com>
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
(Merged from https://github.com/openssl/openssl/pull/10669)
This is a wrapper around OSSL_STORE.
This also adds necessary support functions:
- X509_STORE_load_file
- X509_STORE_load_path
- X509_STORE_load_store
- SSL_add_store_cert_subjects_to_stack
- SSL_CTX_set_default_verify_store
- SSL_CTX_load_verify_file
- SSL_CTX_load_verify_dir
- SSL_CTX_load_verify_store
and deprecates X509_STORE_load_locations and SSL_CTX_load_verify_locations,
as they aren't extensible.
Reviewed-by: Matt Caswell <matt@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/8442)
Also added blanks lines after declarations in a couple of places.
Reviewed-by: Tomas Mraz <tmraz@fedoraproject.org>
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9916)
Apart from public and internal header files, there is a third type called
local header files, which are located next to source files in the source
directory. Currently, they have different suffixes like
'*_lcl.h', '*_local.h', or '*_int.h'
This commit changes the different suffixes to '*_local.h' uniformly.
Reviewed-by: Richard Levitte <levitte@openssl.org>
(Merged from https://github.com/openssl/openssl/pull/9333)
